S-Lock Series
Shanks (with high speed steel center drill)
| Item | Part No. | Specifications |
| Straight shank | SLSKU | Straight shank 3/8" (10mm) |
| SDS shank | SLSKRU | SDS shank (Light-weight hammer drill) |
| Shank for cordless driver drill | SLSKDU | 1/4” Hex Shank (For cutter size of 1-3/8" (35mm) or less) |
| * | The shank for cordless drill can be used with cutters of up to 1-3/8" (35mm) in diameter. |
| * | The plug ejector is included. |
Shanks for Holesaw 578 (with high speed steel center drill)
| Item | Part No. | Specifications |
| Straight shank | SLSK578U | Straight shank 3/8" (10mm) |
| Shank for cordless driver drill | SLSKD578U | 1/4” Hex Shank (For cutter size of 1-3/8" (35mm) or less) |
| * | The shank for cordless drill can be used with cutters of up to 1-3/8" (35mm) in diameter. |
Shanks (without center drill)
| Item | Part No. | Specifications |
| Straight shank for Tile Holesaw | SLSKTU | Straight shank 3/8" (10mm) |
| * | The plug ejector is included. |
Center drills
| Item | Part No. | Specifications |
| HSS center drill | SLCD | |
| HSS center drill 80 | SLCD80 | Holesaw 578 |
| Carbide center drill | SLCDT |
Center pin
| Item | Part No. | Application |
| Center pin | SLCP | Tile Holesaw |
Plug ejector
| Item | Part No. | Application |
| Plug ejector | SLPE | Removal of dust |
Cutter adaptors
| Item | Part No. | Cutter sizes |
| Cutter adaptor 30 | SLADP30 | 1-3/16" (30mm) or less |
| Cutter adaptor 38 | SLADP38 | 1-7/32" to 2-9/16" (31mm to 65mm) |
| Cutter adaptor 130 | SLADP130 | 2-19/32" to 5-1/8" (66mm to 130mm) |
Precautions for use
- The shank for cordless drill must be used with a cordless drill. Use with an impact drill may cause troubles, e.g. rapid wear or chipping of the cutting teeth, falling of the cutter, and breakage of the shank.